TLDR;
- Most advertisers assume retargeting is always better and cheaper than broad prospecting for high-ticket B2B leads, and they obsess over a low, blended Cost Per Lead (CPL).
- Analysis of a real-world campaign for industrial equipment shows this is a dangerous oversimplification. Broad prospecting is expensive but necessary for filling the funnel; retargeting is cheap but relies entirely on that initial expensive outreach.
- The main point isn't choosing one over the other, but engineering a system where they work together. Your expensive broad CPL is the investment that unlocks your cheap retargeting CPL. They are two parts of the same machine.
- Below, I've built a few interactive tools, including a funnel economics simulator and a lead value calculator, to show you how this system works and what your true allowable CPL should be.
If you're selling anything with a five-figure price tag, especially B2B industrial gear, you've probably heard the same advice over and over: focus on your warm audiences, retargeting is where the money is, don't waste spend on broad targeting. It sounds sensible. Go after the people who've already shown interest. It's a no-brainer, right?
The problem is, this advice often leads to a slow, painful campaign death. Your retargeting audiences shrink, your frequency skyrockets, and eventually, the well runs dry. You're left with a high-performing campaign that has no one left to talk to. So, what's the real story? How do you actually scale lead generation for products that cost more than a new car without burning through your entire budget?
I decided to dig into the data from one of our campaigns to find a proper answer. The question I wanted to investigate was simple: How do broad audience targeting strategies really perform compared to retargeting segments in high-ticket industrial equipment advertising? It’s not just about which one has a lower CPL, but understanding the role each one plays in a system that actually generates a predictable flow of valuable leads.
So, what am I looking at?
To get to the bottom of this, I've pulled the data from a single B2B advertiser's account we managed. They sell and hire out industrial equipment, with some products costing well over $20,000. The data covers a five-month period from March to July, with a total ad spend of $6,500. This isn't a huge, multi-million dollar budget; it’s a realistic amount for a specialist B2B company trying to make paid ads work.
The campaign's overall goal was simple: get more qualified leads while bringing the cost per lead down. The headline result was a final blended CPL of $47.25, which, for this industry, is pretty decent. But that blended number hides the real story. To understand what was actually going on, I’ve segmented the campaign data into its two core strategic pillars:
- Broad Prospecting: This is our top-of-funnel activity. These ad sets were targeting cold audiences based on B2B-specific data like job titles, industries, and company size. These people had never heard of our client before.
- Website Retargeting: This is our bottom-of-funnel activity. These ad sets were purely focused on people who had visited the client's website in the last 90 days but hadn't yet submitted an inquiry.
By splitting the data this way, we can stop looking at the blurry average and start seeing the distinct roles, costs, and results of each strategy. This is an investigation into the numbers to see what they tell us about how these two fundamental targeting approaches actually function in the real world for a high-ticket B2B seller.
First, let's look at the overall picture
Before we split things up, it's worth seeing the campaign's progression over the five months. When you combine both strategies, you see a positive trend. The cost per click came down, and from May onwards, the number of leads started to climb steadily while the cost per lead dropped. This is the kind of healthy trend you want to see in any campaign.
Blended Cost Per Lead Over Time
This shows the overall campaign's blended CPL trend across both prospecting and retargeting efforts. As the funnel filled and optimisations took effect, the average cost to acquire a lead steadily decreased.
If this was all you looked at, you’d be happy. Things are moving in the right direction. But this average hides an underlying tension. That $72 CPL in March and the $35 CPL in July are outcomes of two very different engines working at different costs. Let's pull them apart.
So, how much did it cost to reach brand new people?
This is the sharp end of B2B advertising. We allocated the majority of the budget, around 80% ($5,200), to broad prospecting. The job of this money was singular: find and attract relevant people in the target industries who had no prior relationship with the client and get them to the website. This is the hardest job in advertising.
The results reflect that difficulty. Across the five months, the broad prospecting campaigns generated 91 leads at a Cost Per Lead of $57.14. This is nearly $10 higher than the blended average of the whole account. If you were just looking at a report and saw this number next to a much cheaper one, your first instinct might be to turn it off. You'd think it's inefficient. You'd be making a mistake.
These 91 leads are a direct result, but the more important output of this spend isn't the leads themselves. It's the thousands of targeted, relevant professionals who clicked the ad, visited the website, and entered our retargeting pool. That $5,200 in spend wasn't just buying 91 leads; it was buying the audience for the next stage of the funnel.
Broad Prospecting Performance Snapshot
Core metrics for the cold-audience prospecting campaigns. Note the higher CPL, which reflects the cost of acquiring a completely new prospect's attention.
And what about the cheap retargeting leads?
Now we look at the other side of the coin. We allocated the remaining 20% of the budget ($1,300) to the website retargeting campaigns. This money had a much easier job: bring back the people who had already visited the site. These users are pre-qualified to a degree; they know the brand and what's on offer. They just need a nudge.
As you'd expect, the performance here looks fantastic on paper. These campaigns generated 47 leads at a Cost Per Lead of just $27.66. That's less than half the cost of a lead from the prospecting campaign. It's efficient, it's high-performing, and it delivers a great return on the small amount of money spent on it.
This is the number that gets marketing managers promoted. A sub-$30 lead for a $20,000 piece of equipment is a phenomenal result. But here's the question that nobody asks: where did those website visitors come from in the first place? They didn't just appear out of thin air. The vast majority were sent there by the prospecting campaign. The cheap retargeting leads are a direct consequence of the prospecting spend. One literally funds the other.
Website Retargeting Performance Snapshot
Core metrics for the retargeting campaigns targeting recent website visitors. The efficiency here is a direct result of the initial prospecting investment.
So what happens if you just chase the cheap leads?
This is where it gets interesting. The data shows a clear symbiotic relationship. Prospecting is expensive but it fills the retargeting pool. Retargeting is cheap but it's entirely dependent on that pool. What if you ignored this and just followed the conventional wisdom of chasing the lowest CPL?
Imagine you pause the $57 CPL prospecting campaign to put all your budget into the $27 CPL retargeting campaign. For a week or two, you'd look like a genius. Leads would pour in at a very low cost. But your 90-day website visitor audience isn't growing anymore. In fact, every day, people who visited 91 days ago are dropping out of the audience. Your pool shrinks. Your ad frequency to the remaining people goes through the roof. They get sick of your ads. Your CTR plummets, your CPCs rise, and your cheap $27 CPL starts climbing until it's no longer cheap at all. Then, the leads stop completely.
You've optimised yourself into a corner. To demonstrate this, I’ve built a simple simulator below. It uses the actual performance metrics from this campaign. Play around with the budget allocation. See what happens to your total lead volume when you shift everything to efficient retargeting. You'll see the system breaks down.
Funnel Economics Simulator
Use the slider to change the budget split between Prospecting and Retargeting. See how chasing the cheapest CPL can actually reduce your total leads.
So how much should a lead actually cost?
This brings us to the most important question. If the $57 prospecting CPL and the $27 retargeting CPL are just components of a system, what number should you actually care about? The answer isn't the lowest number possible. The real question is, what is the highest CPL I can sustainably afford to acquire a valuable customer?
To figure this out, you need to stop thinking about leads and start thinking about lifetime value (LTV). For a business selling equipment worth $21,000, a single sale is transformative. Let's do some rough maths, based on the principles we use for all our B2B clients.
Let's say the average sale is $21,000, your gross margin is 50% ($10,500), and your sales team closes 1 in every 20 qualified leads that come from your ads (a 5% close rate). A healthy business model often aims for a 3:1 ratio between Lifetime Value and Customer Acquisition Cost (CAC). For a one-off equipment sale, we can treat the first purchase value as the LTV.
So, your LTV is $10,500 (gross margin).
Your maximum allowable CAC is LTV / 3 = $3,500.
If you close 1 in 20 leads, your maximum allowable CPL is CAC / 20 = $175.
Suddenly, that expensive $57.14 CPL from the prospecting campaign doesn't look so bad, does it? It looks like an absolute bargain. You have room to pay three times that for a cold lead and still run a very profitable acquisition engine. This is the maths that frees you from obsessing over small-fry cost-per-lead metrics and allows you to focus on what actually matters: profitably acquiring customers at scale.
To make this tangible, I've built a calculator below. Plug in your own numbers. Find out what your real allowable CPL is. This number, not the one in your ads manager dashboard, should be your north star.
What's Your Real Allowable CPL?
Stop guessing what a good CPL is. Calculate how much you can actually afford to pay based on your business's unit economics.
So, how do you apply this? Stop thinking in silos.
The biggest takeaway from this data isn't that one targeting type is better. It's that they are two necessary parts of a single lead generation engine. Trying to judge them by the same CPL target is like saying the engine in a car is more important than the wheels. It's a pointless comparison; you need both to get anywhere.
A successful high-ticket advertising strategy has to be structured to reflect this reality. It's not one campaign; it's a funnel. Here’s how it should look:
The High-Ticket B2B Advertising Funnel
Stage 1: Broad Prospecting (Top of Funnel)
Goal: Find new, relevant people and drive them to the website.
Audiences: Cold audiences based on job titles, industries, company size, or lookalikes of existing customers.
Expected CPL: High (e.g., $50 - $150+). This is your investment in future leads.
Stage 2: Website Retargeting (Bottom of Funnel)
Goal: Convert interested website visitors into leads.
Audiences: Custom audiences of website visitors from the last 30, 90, or 180 days.
Expected CPL: Low (e.g., $20 - $40). This is where you harvest the return on your initial investment.
The Engine: Blended Performance
Goal: Monitor the health of the entire system.
Metric to watch: Total leads generated within your max allowable CPL (calculated from LTV).
The Trap: Don't pause your expensive prospecting just because your retargeting CPL looks better. You'll kill the engine.
Your job isn't to make every campaign have the same low CPL. Your job is to manage the flow of budget and users between these stages. You spend money at the top of the funnel to create a valuable audience asset—your retargeting list—and then you spend a smaller amount of money to efficiently convert that asset into leads.
The final blended CPL of $47.25 is simply the mathematical outcome of this system working correctly. It is not, and should never be, the target for each individual part of the system. If you try to force your prospecting campaigns to hit a $47 CPL, you’ll have to narrow your targeting so much that you'll never reach anyone new, and the whole system will seize up.
The final word
So, to answer the original question: how do broad and retargeting strategies compare for high-ticket industrial equipment? They don't compete; they collaborate. One is the high-cost, high-volume engine of discovery, and the other is the low-cost, high-efficiency conversion mechanism.
Viewing them in a versus context is the fundamental mistake most B2B advertisers make. They see a high CPL and they panic, cutting off the very source of their future success. The data is clear: the path to scalable, profitable lead generation for expensive products isn't about finding the cheapest clicks or leads. It's about understanding what a customer is truly worth and being willing to invest what it takes at the top of the funnel to fill a pipeline of people you can then convert profitably at the bottom.
It requires a shift in mindset from cost-cutting to system-building. It's more complex, it requires patience, and it means looking at more than just a single number in a dashboard. But as the data shows, it's the only way to build something that lasts.
If you're selling high-ticket products and this all sounds a bit too familiar—if you're stuck in a loop of shrinking audiences and rising costs—it might be time for a proper strategy session. We're happy to offer a free consultation to walk through your campaigns and see how engineering a proper advertising system could work for you.
Cite this Research & Data
If referencing this research, data, or strategy in your publication, please use the attribution below.
Lukas Holschuh
Founder, Growth & Advertising Consultant
Great campaigns fail without expertise. Lukas and his team provide the missing strategy, optimizing your entire advertising funnel—from ad creatives and copy to landing page design.
Backed by a proven track record across SaaS, eLearning, and eCommerce, they don't just run ads; they engineer systems that convert. A data-driven partnership focused on tangible revenue growth.